At the end of the training in driving, students take a theoretical exam and demonstrate practical driving skills at the circuit. To successfully pass the practical part, you need to complete three exercises without errors. If you have worked out the elements of driving a car in different conditions in advance, passing the tests on the racetrack will not be a difficult problem.
Instructions
Step 1
Do the Slide exercise. You have to demonstrate how you know how to get under way on a slight incline, without allowing the vehicle to roll back. Bring the car to the start line, stop, disengage the set gear and put the car on the handbrake.
Step 2
Start to get under way from the place, bringing the car to the "Start" line marked on the overpass. Stop the car. Fix this condition of the vehicle with a hand brake. The clutch pedal can now be released.
Step 3
Start pulling off on the overpass. At the same time, try to ensure that the possible rollback of the car back does not exceed 30 cm. Drive the car to the "Stop" line located at the end of the overpass, stop and put the car on the parking brake.
Step 4
Proceed to mastering the "Snake" exercise. You have to go around the chips installed on the track, without going beyond the limits of the marking. Here you will be required to show the skill of fast and correct rotation of the steering wheel.
Step 5
At the Start line, stop the vehicle, disengage the gear and set the vehicle to the parking brake. Now start moving and consistently go around all the chips located at a distance, moving like a snake. Remember that chips will be penalized for knocked down on the exam. At the stop line, stop, disengage and put the car on the brake.
Step 6
Reverse parallel parking. You have to drive in reverse into a fairly limited space, imitating placing a car in the parking lot between two cars located at some distance from each other.
Step 7
At the starting line, stop the car, place the gear shift lever in neutral and apply the brakes. Now drive in a straight line to the spot where you want to park. Start driving in reverse. Turn the steering wheel, focusing on the installed chips that limit the parking space. After driving, disengage the gear and apply the parking brake.
