Conversion, retrofitting, tuning and styling of minibuses and vans includes widespread areas. Among them: conversion into passenger, tourist, business class, minibuses for travel and transportation of equipment, in just cargo and passenger or mobile workshops.
It is necessary
Car workshop with the appropriate equipment
Instructions
Step 1
The glazing of the cabin can be done by gluing double-glazed windows, panoramic glasses, installing standard glasses under an elastic band.
Step 2
The choice and installation of seats, armchairs and sofas depends on the purpose of the future bus: tourist, for urban transport, armchairs of increased comfort, transformable sofas for cargo and passenger transportation. The seats can be adjustable and non-adjustable, with a transformation mechanism, with air suspension.
Step 3
Bodywork includes the installation of emergency and ventilation hatches, the manufacture of openings for windows, and the sealing of unnecessary doors.
Step 4
Velor, vinyl, leather, Alcantara, carpet and others are used for upholstering the interior and seats.
Step 5
The salon can be decorated with overlays and panels imitating silver, aluminum, carbon, titanium.
Step 6
The floor can be covered with anti-slip plywood, linoleum, carpet, aluminum sheet, plastic.
Step 7
Installation of power frames includes the installation of entrance steps, luggage shelves, podiums, cargo partitions
Step 8
Tables are stationary, folding, transformable, electric or gas spring, backlit and with cup holders. They are most often made of fiberglass or aluminum.
Step 9
Luggage racks and lockers of all sizes and types can be installed
Step 10
Installation and sewing of curtains and curtains, and to them - guide curtain rods.
Step 11
Installation of plastic aerodynamic body kits and hinged roof boxes
Step 12
Installation of additional lighting can include neon and LED lighting, individual and general lighting units.
Step 13
Additional heating systems can be autonomous, parking, converter. Heaters with liquid heat transfer agent (engine coolant) are most often used in buses and vans and combine the functions of a passenger compartment heater and a preheater. Air heaters (hair dryers) are mainly used as an autonomous option for heating the passenger compartment.
Step 14
Installation of ventilation, exhaust, air conditioning systems differ in power and overall / individual airflow. Bus A / C units are rooftop mounted to ensure compactness, speed and ease of installation and ease of operation from the cockpit.
Step 15
The automatic door opener system with electric drives is designed to open and close the side and rear doors of a minibus by pressing a button from the driver's seat or from the passenger compartment. All systems provide for the possibility of manual emergency opening, adjustment of the opening speed and width, and automatic door return upon encountering an obstacle.
Step 16
Installing refrigerators, coffee makers, microwaves, minibars and kitchenettes
Step 17
Installation of audio and video equipment may include VHS, DVD, Mp3, VCD players, Hi-Fi or Hi-End stereos, LCD monitors.
Step 18
Installation of a parking radar and video cameras with ultraviolet illumination
Step 19
Thermo-, noise-, and vibration isolation of the body
Step 20
Inverters and voltage converters convert 12-V or 24-V voltage of the on-board network of the bus to 220 V and 50 hertz for powering electronics and devices. Have protection against very low or very high input voltage, overload, overheating and short circuit protection
21
Re-registration of documents for the conversion of vehicles
