How To Change A Pump In A Vase

Table of contents:

How To Change A Pump In A Vase
How To Change A Pump In A Vase

Video: How To Change A Pump In A Vase

Video: How To Change A Pump In A Vase
Video: Tall Fountain Pump Installation Final 2024, November
Anonim

The water pump of the car engine cooling system, drivers are often called in a short word - pump. The service life of this equipment is designed for its operation, subject to the manufacturer's conditions, up to 160 thousand kilometers.

How to change a pump in a vase
How to change a pump in a vase

It is necessary

  • 13 mm box spanner,
  • head 17 mm,
  • crank.

Instructions

Step 1

As a rule, after working out the prescribed period, the water pump fails, declaring itself an uncontrolled leak of coolant. As a result, the question of replacing the pump arises before the owner of the car. In order to change a faulty pump of the VAZ 2106 engine cooling system, you must first drain the antifreeze.

Step 2

Using a 13 mm box wrench, loosen the three bolts securing the water pump drive pulley

How to change a pump in a vase
How to change a pump in a vase

Step 3

Then, with a 17 mm head, unscrew the generator fixing nut while tensioning the drive belt. Move the generator and remove the drive belt, and finally dismantle the water pump pulley.

How to change a pump in a vase
How to change a pump in a vase

Step 4

Using a 13 mm wrench, unscrew the metal bar from the pump, designed to fix the generator while tensioning the drive, V-belt, and unscrew the four nuts securing the water pump to the pump housing. With some physical effort, dismantle the old water pump and install a new one in its place.

The assembly is carried out in the reverse order.

Recommended: