The regulations for technical work on seasonal maintenance provide for checking the condition of the brake pads. And if access to the front pads is facilitated, then to inspect the rear pads, on a VAZ 2106 car, you need to remove the rear brake drum.
It is necessary
- 13 mm spanner,
- jack,
- key for wheels.
Instructions
Step 1
To perform this work, the vehicle must be parked on a level surface. Then, with the help of a jack, the rear of the car is installed on a reliable support, after which the wheel is removed.
Step 2
Further, on the brake drum, two guide pins are unscrewed, intended simultaneously and for their fastening, located diametrically opposite.
Step 3
Moving 90 degrees away from the pin attachment holes, you will find two more threaded holes designed to screw in two M8 bolts, which are used as a brake drum puller
Step 4
The indicated bolts must be screwed in one by one, feeling an increase in the load, it is required to switch to screwing in another bolt.
After the bolts are fully tightened, the drum is removed from the axle shaft.