Information carriers are changing rapidly. For a car enthusiast, music in the car is very important. But older radios only support CDs, which are going out of fashion and are being updated less and less. In addition, disc recorders tend to jump on the sound track while driving over bumps. A good solution for a motorist is an FM modulator that can play music from a FLASH drive.
Instructions
Step 1
To tune the modulator, find a free frequency on your radio. To do this, switch to radio mode. Use frequencies that are not broadcast. Also consider local radio stations.
Step 2
Install the FM modulator into the car cigarette lighter socket. After that, it will turn on. As a last resort, use the remote control to turn it on. Using the "Forward" and "Back" buttons on the modulator body or remote control, tune to the frequency that you have selected on the radio.
Step 3
Insert the USB stick into the flash drive slot. After a short amount of time, the modulator will transmit a signal to the radio. If the frequency is adjusted correctly, then the music that is recorded on the FLASH drive will be played.
Step 4
Some FM modulators have sound tuning functions. To do this, use the appropriate buttons using the remote control. You can also set up the queue for playing audio tracks.
