After removing the tint, hard-to-remove glue marks often remain on the glass. However, if you try, you can still wash off these sticky marks that spoil the appearance of the car.
It is necessary
- - soap solution;
- -a scraper for cleaning kitchen stoves;
- - gasoline or diesel fuel;
- -Proplan3000 tool.
Instructions
Step 1
The first method is to use an ordinary soap solution. On a coarse grater, grate a piece of any laundry soap. Mix three or four tablespoons of the resulting shavings with warm (but not hot!) Water, stir thoroughly. Apply the resulting solution to a cleaning sponge and wipe the glass thoroughly, paying particular attention to the most sticky areas. If using a sponge alone is not enough, use a special scraper.
Step 2
If you have a glass ceramic hob in your home, it should come with a scraper sponge to clean it. Use it and any bath and sink cleanser. Mister Muscle, Mister Proper, etc. will do. Never use powders on stoves and sinks. The high content of abrasive substances, reinforced by the friction of the sponge, will damage the glass of the car. Since these funds are usually concentrated, very little of them will be required.
Step 3
You can also remove glue stains from tinting car windows using gasoline or diesel fuel. Apply a small amount to a dishwashing sponge or small, clean cloth, then scrub the contaminated surface thoroughly. True, the smell of gasoline will haunt you for some time and it will be quite difficult to get rid of it.
Step 4
In just a few seconds, the American tool Proplan3000 will cope with glue stains. It is a universal car stain remover. They can wipe off oil stains in the passenger compartment, fight off the smell of gasoline spilled on the upholstery and get rid of traces of glue on the glass. It is enough to wipe the windshield with a waffle towel soaked in this composition for 2-3 seconds, and there will be no trace of stains. This product costs no more than 150-200 rubles per bottle.
