At the moment, almost all cars are equipped with anti-theft systems. The Black Bug alarm is one of the highest quality alarms. You can install it yourself by following some recommendations.
Necessary
- - installation tools;
- - car alarm Black Bug.
Instructions
Step 1
Prepare the vehicle and the anti-theft system for work. Check that the correct parts, terminals, and alarm connectors are correct and present in the instructions. Also verify the quality of the product by examining the wires for kinks and kinks. Proceed with installing parts of the system. Screw the electronic control unit with self-tapping screws. Then fit the interrupting relay.
Step 2
Install the valet button so that it can be located in the most hidden place of the car. This button provides a very important function, which is to turn on / off one of the units or the entire system. It is necessary to place the valet button in a secluded place because the hijacker also knows about its presence and wants to disable it.
Step 3
Install and secure the shock sensor. Do not install it on a car body, as this can minimize the vibration amplitude. Also note that this sensor has sensitivity settings. If you make the anti-theft system overly sensitive, the alarm will sometimes go off for no reason.
Step 4
Install a siren horn under the hood of the car. For this, select an accessible place, since the siren can be triggered for no apparent reason and will not be turned off by pressing the button. Disconnecting may sometimes require cutting entangled wires so that the anti-theft system stops disturbing the hearing of others.
Step 5
Install an auxiliary warning system that will signal a burglary or theft of a car, if the Black Bug anti-theft system model allows it. Insert the duplicate horn into a secluded spot as well so that it is not visible. For good operation of the auxiliary system, it is necessary to provide it with autonomous functioning or an additional power circuit.
