During operation, the car radio gradually gets dirty, dust gets into it. As a result, the disc may begin to "swallow" and then "spit out". Therefore, from time to time it is necessary to clean the radio.
Necessary
- - cleaning disc;
- - alcohol solution;
- - napkin.
Instructions
Step 1
Purchase a special cleaning disc that is pre-coated with liquid and cloth. Insert the disc into the radio tape recorder and start it, while strictly following the instructions. If this action does not help, then with particular care remove the car radio from its original place, and do not forget to disconnect the electrical connector. Then lay it on a flat surface, be sure to turn on additional lighting so that you can carefully examine the interior of this equipment and make a very thorough cleaning.
Step 2
Remove the top and bottom covers. But if one of them is solid, then remove only the one that can be removed. Carefully inspect the device, remove accumulated dirt, small objects and parts from it.
Step 3
Provide access to the radio head by removing the parts. Examine her. If you see traces of dirt on it, then immediately remove them with a napkin or rag. Do not forget to pre-moisten them in an alcohol solution. If you have a cassette recorder in your car, then after you disassemble it, press the start and rewind of the cassette several times so that you can remove the accumulated dirt.
Step 4
Pay attention to the lens, it will also need to be cleaned with a dry cloth or cotton wool. Do not use alcohol or other liquids in this case, as they can lead to the destruction of the lens. As a last resort, you can use a soapy solution. This is especially true for pollution caused by smoking in the car.
Step 5
Start assembling the radio tape recorder in reverse order. Reconnect the electrical connectors immediately after cleaning, and then check the functionality. If necessary, you can repeat the procedure. If the car radio has any malfunctions, remove it, and then take it to a specialized repair center.
