A Simple Way Without Overhaul To Temporarily Eliminate The "zhor" Of Oil From The Engine

Table of contents:

A Simple Way Without Overhaul To Temporarily Eliminate The "zhor" Of Oil From The Engine
A Simple Way Without Overhaul To Temporarily Eliminate The "zhor" Of Oil From The Engine

Video: A Simple Way Without Overhaul To Temporarily Eliminate The "zhor" Of Oil From The Engine

Video: A Simple Way Without Overhaul To Temporarily Eliminate The
Video: How to eliminate ZHOR of oil without a capital of the internal combustion engine? 100% way. 2024, December
Anonim

The oil consumption of your car engine is far from the most pleasant problem. But it lends itself to a fairly easy solution. You just need to know which parts need to be replaced on time and which oil is best to use.

A simple way without overhaul to temporarily eliminate the "zhor" of oil from the engine
A simple way without overhaul to temporarily eliminate the "zhor" of oil from the engine

Often, car owners have to deal with an engine problem - "zhoror", which is expressed by increased oil consumption, in which the waste indicator can reach 1 liter or more per 1000 km of run. To a greater extent, cars with a range of under 150,000 kilometers are susceptible to this.

Definition of "zhora" oil

Absolutely any engine, characterized by reliability, serviceability and perfection, consumes oil, the waste of which is approximately 150-250 ml with a run per 1000 km. As a result, adding lubricant to the motor does not make sense until the next service visit. [desc] If during operation a car starts to consume 1 liter of oil or more per 1000 km of run and is characterized by [/desc] an unpleasant smell from the exhaust pipe, from which rich blue smoke also comes out, then this indicates the presence of serious problems, and the car owner financial costs for major repairs are awaiting.

Oil-removable rings sooner or later wear out, which in most cases leads to similar malfunctions. They are heavy-duty piston pads that retain the thinnest layer of oil on the cylinder, thereby producing proper engine lubrication. In the event of their wear, the oil-removable rings do not completely remove the oil and it is sent to the combustion chamber, in which it completely burns out, as a result of which a characteristic bluish smoke appears.

You can solve this problem, not only by replacing the piston group and oil-removal rings, but also by using many simpler methods. It should be noted that there is no universal solution to this problem. The use of this or that method of such repair is individual and depends on the problems that led to the "gore". In one situation, to completely eliminate the flaw, it is enough to use the simplest method, in another, it will be necessary to overhaul the engine with the concomitant replacement of caps, rings and pistons.

Motor oil brand 20W50

When solving the problem with "zhor", motor oil of the 20W50 brand is used. It is mainly used for motorcycle engines, but there are also special lubrication options available for use in automobiles. Oil of this density allows you to temporarily eliminate increased waste, which will allow the car owner to operate the car, having driven it for another 8-10 thousand km.

But the use of such a thick oil will only temporarily solve the problem. If you are not going to sell the car and plan to use it for a long time, it is strongly not recommended to constantly use thick oil as a solution to the problem.

You must immediately contact a professional who will open the engine and eliminate all existing problems, carry out a major overhaul of all systems and put your transport in order.

Recommended: