Every motorist spends most of his time in the cabin of his iron horse. Therefore, the interior must fully satisfy the needs of the owners. This will avoid the rapid onset of fatigue during a long trip. And the neat interior with interesting design solutions can cheer up not only the driver, but also the passengers.
Necessary
- - paper and drawing supplies;
- - sewing machine;
- - threads and needles;
- - colored film for pasting;
- - building hair dryer;
- - stationery knife and scissors.
Instructions
Step 1
Think over all the changes that you want to make to the interior of your car, and also set aside the amount of banknotes that you are willing to spend on such an enterprise. If you want to transform the interior for as little money as possible, then buying covers would be an excellent solution. Today, auto shop sellers are ready to offer you a very wide range of different covers.
Step 2
Purchase new interior details. These could be new door handles or armrests for the driver and front passenger. In this case, you can not stop at the factory version, but make your own changes to the purchased parts, painting them or sheathing with material.
Step 3
Change the torpedo. In this case, you can install the dashboard from another car. The easiest way is to install a torpedo from another model of the same line as yours. This will allow you to make a minimum of technical changes to the design of the mountings. This method is most popular among owners of VAZ cars. However, when converting, safety must be taken into account, since an incorrectly installed torpedo in an accident can cause serious injury to the driver and passengers.
Step 4
Cover the plastic parts with plastic wrap. To do this, use a soapy water solution and a hair dryer. It is most convenient to paste over the dismantled parts. Choose the color of the film to your liking.
Step 5
Re-sew the interior of your car. To do this, remove all seats from the passenger compartment. Remove the door, ceiling and floor trims. Make patterns on them. Select a new material from which you will make the cladding. It is best to use special materials that are designed for use in the machine.
Step 6
On the back of the material, outline future details according to the patterns made. Make sure the markings are correct and cut out the details along them.
Step 7
Make your first fitting. Sew the details with a basting stitch. Try on the blanks on the seats. If they fit well, sew all parts with a final seam with fine stitching. Hide any sticking out threads and put on the seat covers.
