The scooter is a popular means of transportation in urban areas due to its economy, as well as its small size, allowing it to move freely in traffic jams. Redesigning this two-wheeled vehicle will help make it more powerful and faster.
Necessary
- - cladding material;
- - set of tools;
- - new optics;
- - new sound signal;
- - sandpaper of various sizes;
- - primer;
- - putty;
- - dye;
- - new rims;
- - fishing line;
- - new sound signal;
- - alternative optics.
Instructions
Step 1
Think carefully about your future rework plan for your scooter. It is necessary to take into account not only your own desires, but also financial capabilities, since some ideas may require too large financial investments.
Step 2
Consider the practicality of your future rework. For example, installing wheel discs that are too large will result in brake failure. The permeability of a scooter with such discs will significantly deteriorate.
Step 3
Get a complete refurbishment of all exterior plastics. To do this, first carefully remove it. Find all the fasteners and bolts that hold the plastic to the metal frame. Unscrew the screws, having previously marked their location.
Step 4
Examine the entire surface of the plastic carefully. Small cracks must be sealed with a special compound or soldered. You can also make holes along the edges of the crack and pull off both parts with a fishing line. This will give your scooter a fighting look.
Step 5
Sand the plastic thoroughly with sandpaper. Then cover with several coats of primer and putty. Let the surfaces dry. Choose a color scheme. Paint all plastic parts with two coats of paint. If desired, the surface can also be varnished.
Step 6
Replace the standard optics with an alternative one. At the same time, make sure that the new light modules comply with GOST.
Step 7
Install new rims. You can also paint old ones. To do this, remove the wheels. Cover the rubber thoroughly with masking tape or newspaper. Sand the steel surface of the disc. Then prime the disc and paint.
Step 8
Re-sew the saddle. To do this, use a special material that can withstand frequent contact, such as car leather.
Step 9
Replace the standard beep with a new one. This will not only make your vehicle stand out from the crowd, but also make your ride safer, as you will be able to notify those around you in advance about your approach.
