Implementing ideas that turn a budget car into a sports car, during which the car enthusiast reconstructs almost all the components and assemblies of his car: the engine is boosted, the gearbox is replaced, the brakes are changed and the suspension is strengthened. And only after installing a stretch under the hood - tuning can be considered complete.
Necessary
- - socket wrench 13 mm
- - ratchet wrench
- - stretching
Instructions
Step 1
The installation of the stretch is aimed at strengthening the front struts, and such work takes away from the master literally ten to fifteen minutes.
Let's say that a stretch has already been purchased in a store, and to install it we drive into a regular garage: if only the floor surface is flat.
Step 2
We open the hood, after which we unscrew with a 13 mm wrench six nuts securing the struts to the supports from above - three on each side. You should not be afraid for the support - they are not in danger. In cases where a brace is installed, equipped with a coupling for adjusting its length, then the adjustment is made immediately before installation.
Step 3
Adjusted in length, it is installed on the supports of the posts, after which all six fastening nuts are tightened with a 13 mm wrench.
Step 4
Tests carried out based on the results of tuning the suspension showed that the car's handling improved significantly during cornering at high speed. The rolls were almost not felt, and the road feel and steering response improved.
