Everyone knows that polishing the car for the owner is as important as the technical condition. Watering your car gives your car a fresh look. Polishing is carried out in several stages.
1) Preparing the car
Preparing the car for polishing consists of washing the car and keeping the temperature. The car should be washed thoroughly, because if you do not do this, you can ruin all your work. Keeping the temperature right will allow you to work in peace. There are such cases that they polish a car in the open air, under the heat of the sun everything comes out from under the mount. The car heats up and when you apply scratches you burn your hands, or when polishing the polishing paste dries.
2) Drawing small marks
Small marks are made with sandpaper. In this case, you should know that the drawing of scratches with sandpaper is done with water. Sandpaper 2 thousand grit will allow you to inflict the smallest risks. You can also use 2500 grit. Risks are applied until the coating is matte. It is worth remembering that it is necessary to walk over the entire part in a circular motion and periodically wipe it dry. After wiping the part dry, you will see your flaws and you need to apply risks in the unapplied places.
3) Watering in several stages
Polishing is always done in 4 stages:
1) Polishing with paste ref. 893 153.
2) Polishing with paste ref. 893 154.
3) Polishing with paste ref. 893 155.
4) Hand polishing Ref. 893 0126.
Polishing acts like sandpaper, only the marks are so finely applied that the naked eye simply cannot see them. Thus, the coating exhibits the luster of the car.
