The rapid development of information technology has created conditions under which the production of all kinds of devices designed to establish communication and data transmission has been established. The life of a modern person is also unthinkable without the possession of a personal vehicle. And the only place designed to connect various electrical devices in the car is the cigarette lighter.
Necessary
- - pliers,
- - screwdriver,
- - file or file.
Instructions
Step 1
As you know, just do not have to connect the owners to the on-board network through the cigarette lighter socket. From a mobile phone charger to a laptop or compressor. Many of the devices require increased power consumption, which creates a significant load on the cigarette lighter, which often refuses to work in modern cars, despite the absence of visible faults during visual inspection.
Step 2
After replacing a failed cigarette lighter with a new one, it also refuses to function after some time, which causes a lot of complaints from car owners against the specified equipment.
Step 3
In order to avoid unjustified expenses, it is necessary to independently slightly change the design of the cigarette lighter, thanks to which it is connected to the vehicle's on-board network.
Step 4
If you have suffered a setback due to the refusal of the cigarette lighter to supply electricity to consumers, then do not rush to the car shop to purchase a new device. First, get to its back, and after disconnecting the wires from the cigarette lighter, you need to check the presence of current at their terminals using a control lamp. Lack of voltage indicates the need to change the fuse. The presence of voltage in the indicated place - provides for the complete disassembly of the cigarette lighter, in order to improve the node of its connection to the power source.
Step 5
To do this, the nut is unscrewed on the cigarette lighter, and it is disassembled into its constituent components. Among which there is an incomprehensible semiconductor plate located at the bottom of the specified device. It is she who, as a rule, in most cases is the reason for the failure of the cigarette lighter.
Step 6
The plate must be removed without any regret. Then the projection on the cigarette lighter body is grinded with a file, after which it is successfully assembled, installed and connected to the cigarette lighter of the supply electric wires.
