It would seem that such an operation as replacing a car wheel does not imply difficulties. But in reality, some newbies are still lost. Detailed instructions on how to change a wheel without assistance.
Necessary
- -spare wheel;
- -jack;
- -key;
- - chocks or their substitutes.
Instructions
Step 1
To change a wheel, the machine must be parked on level ground. Tighten the handbrake and shift into gear if your car is equipped with a manual transmission. If you have a car with "automatic", then it is enough to move its lever to the "P" position. It is also advisable to place chocks under the wheels or something that can fulfill their function.
Step 2
Loosen the wheel nuts before lifting the machine. It will be enough to weaken them by just one turn.
Step 3
Take out the spare wheel. For complete peace of mind, you can put a "spare tire" under the threshold of the car in the area of the wheel that is being replaced. In this case, it will not roll away and scratch the body if you just leaned it against the car.
Step 4
Now you need to raise the car with a jack so that the wheel rotates freely in the air. But be careful - the top point of the jack must necessarily rest against a special socket. Otherwise, do not start lifting the machine.
Step 5
Raised? Now unscrew all nuts and remove the wheel. Install the new wheel, and tighten and tighten the nuts, but do not tighten them without lowering the machine. Finally, do not forget to check the air pressure in the tire, and if it does not reach the norm, pump it up.
