A good sound in a car is a very important indicator of the class of a car, the better the sound, the more expensive the car looks.
It is necessary
- -noise isolation
- -vibration isolation
- -supporting tool
- -musical car components
- -Large capacity batteries
Instructions
Step 1
There are a lot of changes that need to be made to get really high quality music in your car.
The first thing to do is to keep the car free of extraneous noise and crickets. To do this, it is necessary to completely glue the vehicle with sound insulation, especially at the joints of parts such as joints of doors with a torpedo. Much attention should be paid to the soundproofing of the arches, because 60% of extraneous noise comes from there. Sound insulation is glued in a double layer to the arches, sills, luggage compartment, doors and engine compartment of the car.
Step 2
After pasting with noise insulation, the vehicle is vibration-proofed for. It is worth noting that plastic films must be used between the layers of noise insulation and vibration insulation, especially in the doors, so that condensation does not accumulate and car parts do not rust. The vibration isolation is thicker than the first material, so it is necessary to calculate the place for its installation, especially if the machine is of domestic production.
Step 3
Next, you need to correctly position the car acoustics. Here you should pay attention to the reflection of sound directly in the user's car. If it is a hatchback or station wagon, the sound and bass from the trunk are much better reflected in such a body than in a sedan, which in turn will entail changes in the rear shelf for the subwoofer. For tweeters, it is also better to use sound reflection from glass; for this, installation in a car torpedo in the upper part under the windshield is suitable. Mid-range speakers are best used in the front and rear doors. Pay attention to the installation of mid-range speakers so that the sound is not distorted or muffled, the installation should be at the end of the door just above the seat. Bass speakers are best installed in the front doors and the rear parcel shelf if the car is in a sedan body.
Step 4
Once you've decided on the speaker setup, you need to use a suitable podium. For the best sound, wooden structures are used to avoid unnecessary vibrations and noise. After the purchase or manufacture of podiums, they are covered with additional material, according to the style of the car. Basically these materials are carpet and leather, all those materials that additionally eliminate vibration.
Step 5
Next, you need to install the power plants of the car audio. Amplifiers, processors, and a subwoofer are often placed in the luggage compartment to save space, better cooling the system, and at the expense of the weight of the system, better weight distribution of the vehicle. Batteries are installed with increased capacity, sometimes even two batteries to power the entire audio system. It is also better to use a generator with a larger capacity for constant power supply.
Step 6
For the best sounding of the system, it is worth using licensed car components and not overusing sound pressure. For proper layout, it is worth using 60% of the power of the mid-range speakers, 30% of the subwoofer and 10% of the woofers, this is the most acceptable layout for high-quality sound. Do not forget about a high-quality radio tape recorder, which must be processor-based or use a processor through adapters. For high-quality sound transmission, you should use a CD-ROM with the quality of music on it in a 1: 1 ratio or use the AUX wire to transfer music from the phone to the radio tape recorder, but for this the phone must support music in quality (flac) in order to keep the highest sound quality …
Step 7
It is worth paying attention to the stylistics of the cabin, not only for aesthetic purposes, but also for additional getting rid of the noise of the cabin due to the use of leather material. All this will allow you to achieve the maximum sound quality in the car.
