It is quite possible for any self-respecting biker to eliminate malfunctions of a motorcycle, domestic and foreign, if there is free time. So it won't go broke for long if you go to the service center for any nonsense.
Instructions
Step 1
Determine the cause of the breakdown and determine the amount of work to be done. Choose a place to fix your vehicle, such as a garage box. Support the motorcycle securely so that it does not fall and cause injury.
Step 2
Review the model manual, review all gauge benchmarks, and have spare parts for scheduled replacement.
Step 3
Ensure the safety of the planned work, wear protective goggles, gloves and coveralls made of non-combustible fabric.
Step 4
Disconnect the fuel tank and store it in a safe place to avoid a fire hazard.
Step 5
Prepare all the tools that you may need during the maintenance process.
Step 6
Then carefully inspect all the components and assemblies of the bike. Pay close attention to all systems and important details. If necessary, disassemble the required parts and lay them out on a piece of flattened tarpaulin. Do not lose the accessories washers, bolts and nuts.
Step 7
Check the insulation of the electrical equipment and the tightness of the pipes each time. If possible, do the work together with a partner who can always insure or control individual moments.
Step 8
Clean the fuel and air passages. Refit the disassembled parts.
Step 9
Tighten the assemblies securely so that they do not come loose due to vibration. After assembly, check the functionality of the motorcycle.
Step 10
Periodically carry out maintenance on your device, change the oil, spare parts and service accessories at the required frequency.
Step 11
Then breakdowns at the most inopportune moment will happen less often. In very serious cases, contact a specialized service center for motorcycles of this model, which will provide a guarantee and qualified restoration of your "iron horse".
