How To Replace The Alternator Belt

Table of contents:

How To Replace The Alternator Belt
How To Replace The Alternator Belt

Video: How To Replace The Alternator Belt

Video: How To Replace The Alternator Belt
Video: How to Replace a Serpentine Belt 2024, November
Anonim

The fact that the generator belt has served its due date and requires replacement is evidenced by such signs as the appearance of a characteristic "whistle" from under the hood after turning on the interior heater, high beam headlights or other electrical appliances that cause increased power consumption from the on-board network of a VAZ 2106 car.

How to replace the alternator belt
How to replace the alternator belt

Necessary

  • 17 mm socket wrench,
  • new alternator belt.

Instructions

Step 1

In addition, signs such as cracks in the belt surface, excessive stretching and the associated tension problem of the alternator belt are the reason for replacing the alternator belt.

Step 2

In the event that the car owner decided to change the alternator belt on his own, then this procedure is performed according to the following scheme:

- on a muffled engine, the hood rises, - with a 17 mm socket wrench, loosen the nut fastening the generator to the tension bar, - the generator is moved as close as possible to the engine,

- the worn out alternator belt is removed and removed, - a new belt is installed instead, - the alternator belt is tensioned, - the generator is fixed on the tensioning bar, by tightening, loosening the wound, nut, with a 17 mm wrench.

How to replace the alternator belt
How to replace the alternator belt

Step 3

The alternator belt is considered properly tensioned when, when pressing on it with a hand from above, with a force of three to four kg, it deflects no more than one centimeter.

Recommended: