On many VAZ cars, the suspension is stiff enough, so many motorists strive to make it softer and achieve comfortable conditions when driving on the road.
Necessary
new springs, shock absorbers, alloy tires, vibroplast
Instructions
Step 1
Try installing new springs that have a variable pitch. This type of springs is not uncommon and is produced even here in Russia, so they are often found in the automotive markets. Remember that suspension upgrades must be complex, because replacing one part is sometimes not enough.
Step 2
Replace the shock absorbers. Remember that these parts are of different types, each with its own merits and demerits and is often determined by the riding style. Therefore, it is better to buy springs and shock absorbers in a set in order to get equipment tuned for each other.
Step 3
If the financial situation allows, then buy and install imported tires on the car. They have a much softer sidewall, so road bumps will be better absorbed while driving, which will increase comfort. However, in this case, the chance that a rupture will appear at high speeds is significantly increased when entering deep holes with uneven edges.
Step 4
Install alloy wheels that have a long overhang. This measure will increase the arm of the suspension arm, which will allow the spring to be compressed much more easily. Remember that this type of disc significantly increases the load on the hub bearings, which leads to a reduction in their service life.
Step 5
Often, the discomfort from driving is increased by extraneous noise and rattling parts of parts. And this is not the fault of the suspension, but the design of the car. To eliminate this drawback, purchase a vibroplast or any other noise insulation in a specialized auto shop. Use it to glue the entire car, from the bottom to the roof. This measure, together with the above methods, will allow you to enjoy and enjoy the ride.