Car door cladding is done in order to increase noise insulation properties. With the help of the material, you can radically change the interior of your car.
Instructions
Step 1
If this is your first time doing this, then start with the easiest parts. Try overtightening door handles, sills, and various other plastic parts. If you did it well, then proceed to sheathing more complex parts.
Step 2
You can trim the car interior according to the manufacturer's patterns. To do this, remove the old upholstery and rip it apart at the seams. Make new patterns using old patterns. Sew the parts with a special sewing machine. Make sure that there are no bubbles or distortions under the sewn pieces of fabric. Otherwise, all defects will greatly attract attention.
Step 3
Leather is often used for door trim. However, it is very difficult to work with such material, since it practically does not last. Exactly stick it can only be people who have been engaged in the upholstery of the cabin many times. If you are new to this business, then do not risk it, but try to sheathe the interior with simpler materials.
Step 4
The easiest way is to sheathe the interior with a Carpet. Many car manufacturers use it when decorating the interior of cars. It is highly discouraged to glue this material to the "Moment". When the heating is on, the glue will poison the passengers with its harmful vapors. Over time, pieces of carpet will begin to peel off. It is best to attach the carpet to special aerosol adhesives. Purchase them from an auto parts store.
Step 5
Before plating a part, be sure to remove it. You will not spend a lot of time on dismantling. It will be much more convenient for you to glue the material. As a result, you will get a smooth and beautiful skin. If the carpet needs to be wrapped around the back of the part, you will have to remove it anyway. Carpet is good at preventing squeaks, which often make plastic parts. This material is also good insulation.
