Examining the rear bumper of a VAZ 2110 car, one involuntarily arises a feeling of self-doubt, especially in those cases when it is necessary to remove it from the body of the car with his own hand. A similar feeling is formed due to the impressive dimensions of the specified part.
Necessary
- 10 mm socket wrench,
- curly screwdriver.
Instructions
Step 1
In this case, the most relevant folk wisdom, which says: "The eyes are afraid, but the hands are doing!".
Step 2
The first step is to de-energize the vehicle. This task is achieved by simply disconnecting the ground cable from the battery.
Step 3
Next, the luggage compartment opens, inside which the rear seat upholstery and the lining of the right side of the trunk are removed. After that, access to the electrical connectors opens, with the help of which power is supplied to the rear license plate lamps - we disconnect them, and unscrew the nut of the contact wire of the lamps with ground on the body.
Step 4
After doing the above, unscrew the rear bumper mounting bolts on the side, one on each side.
Step 5
And after the two bolts of the lower bumper attachment are unscrewed, the specified part of the car body moves against the course of the car and is removed.
