How To Make A Forward Flow With Your Own Hands

How To Make A Forward Flow With Your Own Hands
How To Make A Forward Flow With Your Own Hands

Table of contents:

  • 👤 Author Maria Gibbs 📧 [email protected].
  • ⏱ Public 2023-12-16 03:05.
  • 🖍 Last modified 2025-01-22 17:47.

One of the options for tuning a car is to replace the muffler from a conventional muffler to a direct-flow muffler. This increases the engine power by 5-7% and also makes the sound of the engine running either louder or quieter. You can do the forward flow with your own hands.

How to make a forward flow with your own hands
How to make a forward flow with your own hands

It is necessary

  • - a set of keys from 13 to 19
  • - flat and Phillips screwdriver
  • - a hammer
  • - stainless pipe
  • - drill and drill set
  • - heat-resistant sealant
  • - glass wool
  • - grinder
  • - electric or gas welding

Instructions

Step 1

Drive the vehicle onto a viewing hole or lift. Stop the engine. Wait for the engine to cool down.

Step 2

Remove the old muffler using a set of wrenches, screwdriver and hammer. Carefully cut off the muffler cover with a grinder. Remove and discard all internal parts and muffler baffles.

Step 3

Drill many holes with a diameter of 5-7 mm in a stainless pipe of a suitable size. Place this pipe inside the resulting muffler barrel.

Step 4

Place glass wool tightly around the entire muffler. Wrap the tube with a piece of asbestos. Close the muffler cover and weld it. Seal all joints with heat-resistant sealant.

Step 5

Reinstall the resulting forward flow in reverse order.

Recommended:

How To Make A Motorcycle With Your Own Hands

How To Make A Motorcycle With Your Own Hands

From what our fathers and grandfathers did not make vehicles! But homemade motorcycles are still relevant in our time. Fans of fast driving hold exhibitions where they show their work. And in some cases, such bikes are in no way inferior, and sometimes even superior to vehicles manufactured at factories

How To Make A Snowmobile With Your Own Hands

How To Make A Snowmobile With Your Own Hands

In the northern regions of Russia in winter, the only means of transportation is a snowmobile. But not everyone can purchase a branded model, and certain categories of citizens need a non-standard design. In both cases, the solution is to make a snowmobile with your own hands

How To Make A Trailer With Your Own Hands

How To Make A Trailer With Your Own Hands

A trailer is a very convenient and necessary vehicle for transporting goods. It is simply necessary for use in the household, so many motorists are wondering: how to make it yourself? Instructions Step 1 Align the trailer frame with the body frame grill

How To Make A Yacht With Your Own Hands

How To Make A Yacht With Your Own Hands

Numerous water travel enthusiasts often think about creating their own yacht. This will significantly reduce the cost of permanent lease of the vessel and the constant waiting for the lease time. The only solution may be to build a yacht. Building it to order is quite problematic

How To Dry-clean Your Salon With Your Own Hands

How To Dry-clean Your Salon With Your Own Hands

You can dry-clean the interior with your own hands, with tangible savings in money and without parting with the car for the whole day. At the same time, it is important not only to choose the right cleaning chemistry, but also to follow certain recommendations unswervingly