The working condition of the vehicle's braking system is the basis for the safety of road users. In order for the car to brake quickly, it is necessary to replace the brake fluid, pads, discs in a timely manner. Even a beginner can handle the replacement of brake discs on their own. It is enough to have the necessary tools.
Replacement frequency
If it's time to replace the discs, the driver will feel it by the behavior of the car. The distance increases when braking; when the speed is slowed down, the car begins to throw to the side. Signs are quite common: an increase in pedal travel, a decrease in the level of brake fluid. All this indicates that the brake system requires repair, including replacement of discs.
Variety of brake discs
There are enough brake disc options for any car brand. These can be factory models, and with the presence of tuning. The latter are notched to provide better braking. Vented disc designs are also popular.
The spare parts market is represented by domestic, Chinese and European manufacturers. The choice becomes easier if you take as a basis the possibilities of financial position. Brake discs should be purchased for one axle, that is, a pair. It will not be superfluous to replace the pads. It is best to purchase pads from the same company with brake discs. Old pads on replaced discs will knock out grooves. This will impair the braking performance of the vehicle.
Getting started with the repair
For work, you will need a jack, a set of wrenches, an inspection pit. Better, you will have an assistant. Use the shoes to secure the vehicle. This will stop him from moving back and forth. Raise the side of the car on which the disc will be replaced, remove the wheel. You need to substitute an emphasis under the car.
Before dismantling the old disc, it is necessary to squeeze the piston of the working cylinder.
If you will not change the hub bearing, then you need to at least clean the surface of dirt. Next, you need to squeeze the brake pedal to fix the steering wheel. Remove the disc mounting bolts. Next, you should disassemble and remove the caliper, and then the brake disc. Remember to secure the hub. The assembly of a new brake disc and pads is carried out in the reverse order.
After assembling the brake system, you should bleed the brakes.
