How To Remove A Seat In A Car In

Table of contents:

How To Remove A Seat In A Car In
How To Remove A Seat In A Car In

Video: How To Remove A Seat In A Car In

Video: How To Remove A Seat In A Car In
Video: how to remove car seat Hyundai elantra se/2017 2024, November
Anonim

There are situations in which the car enthusiast needs to remove the seats from his car. The reason could be repair, cleaning or replacement of the seats. It is not always worth contacting a specialist with this problem. You can also remove the seat from the car yourself.

How to remove a seat in a car
How to remove a seat in a car

Necessary

  • - wrench;
  • - screwdriver (Phillips).

Instructions

Step 1

Open the door wide in the car to remove the back seat. Then find the small handle from the pillow lock. It is located under the side of the pillow. Press on this handle without exerting great effort so as not to break it, as it will be quite difficult to get the same anywhere else. Use extreme caution to pull the pillow out by lifting the edge of the pillow. Then go around the car and do the same on the other side. This is necessary so that all ends of the seat cushion are disconnected from the grooves. Pull the pillows out of the passenger compartment by lifting them slightly.

Step 2

Set the head restraints to the lowest position and, using considerable force, pull them up to the stop. To get the head restraints out of the back of the rear seat, you need to reach the latch and press it

Step 3

Look for the retainer strap on the back of the seat and start pulling it up. If the seats in the cabin have undergone a constriction, you may not feel it the first time. But rest assured, she is there anyway. Perhaps, during operation, the latch may jam, then try again several times. If the result is still not achieved, lubricate this mechanism with lithol, and then remove all the elements.

Step 4

To remove the front seat of the car, set the lever to the middle position. Unscrew the bolts on both sides of the runners, then push the lever and move the seat as far forward as possible, and then immediately upward as far as possible. After carrying out this procedure, the seat should independently detach from the runners on which it is attached.

Step 5

Find the bolt connecting the backrest to the seat and unscrew it if you want to remove the seat in parts. Then unscrew the backrest adjustment wheel from the seat. It is located on the side of the seat. Then remove this backrest from the seat grooves and carefully remove it from the passenger compartment.

Recommended: