Renault Logan is one of the most popular foreign cars in Russia. This car is assembled on the territory of our country, which allows to reduce the cost of its transportation. Consider how to remove the seats on this car.
Instructions
Step 1
All you need to remove the front seat is a socket wrench and a little patience. Gently push the seat back as far as possible. To do this, find a locking lever on the bottom left side, which you pull up, at the same time move the seat. Then release the handle and lock the chair in the position that you need at the moment.
Step 2
Locate the two bolts that secure the seat rail to the underbody of the vehicle and remove them. Return the seat to its original position by sliding it forward. Remove the bolts that secure the rear of the slide. Then carefully remove the seat from the passenger compartment. Remember to apply an anaerobic thread lock to the threads of the fastening bolts when reassembling.
Step 3
To remove the rear seats, have a wrench on "13". Locate the cushion retainers, which are located in the base of the body, and carefully remove them from the holes. Be careful not to damage these clips. Then remove the pillow itself from the car. Remove the bolts to the left and right of the seat back. They are designed to fasten the backrests to the rear bulkhead of the body.
Step 4
Gently lift the backrest, then remove the clips that secure it to the rear bulkhead of the machine body. Move the seat belts aside and pull the backrest out. This procedure is best done with an assistant, which will greatly facilitate and speed up the process.
Step 5
For further installation, do everything in the reverse order. Make sure that after installing the rear seat backrest, the clips fit exactly into their holes in the rear bulkhead of the body. Then put the rear seat cushion back in place.
