Having decided to repair a motorcycle or prepare it for the next season of operation, you must adhere to certain simple repair rules. Adhering to these rules, you will not have to look for a bolt or nut that has rolled somewhere, and the motorcycle repair itself will be done efficiently, and your nerves will be intact.
Instructions
Step 1
Repair rules First of all, you need to prepare the necessary tool. This simple set consists of a set of open-end and spanner wrenches, a set of screwdrivers; it is desirable to have a set of heads.
Step 2
Prepare a place in the room where the repair will be carried out, i.e. remove all unnecessary that may interfere with the repair. Purchase the necessary spare parts, oil and lubricants in advance.
Step 3
When starting to disassemble a motorcycle, it is necessary to record the disassembly sequence, and fold all dismantled parts in the order of disassembly. Following this rule will greatly facilitate the assembly of the motorcycle.
It is advisable to first tap the rusty nuts with a hammer and then moisten them with kerosene.
Step 4
To make a quality motorcycle repair, you need to do all the work slowly and carefully. It must be remembered that the health of the motorcycle owner often depends on the quality of the repair.
Step 5
After completing the repair, you can make a test run of the engine and place the motorcycle on a stand. Shift the transmission. At the same time, turn to the rear wheel, there should be no vibration and extraneous noise, and the wheel hub should not heat up.
Step 6
After a test run and an initial test of the motorcycle's operation, a short test drive must be made. During a test drive, you must carefully listen to the operation of the motorcycle engine, paying attention to any extraneous noise or their absence. Pay attention to the handling of the motorcycle and the quality of the brakes. If any defects appear, it is better to seek help from more experienced motorcyclists.
