Seats in the passenger compartment must be covered, as the upholstery material is highly susceptible to dirt. Using these accessories, the driver not only increases the service life of the coating, but also preserves the aesthetic appearance of the interior. Cleaning the cover is much easier than changing the entire trim.
It is necessary
A set of car covers
Instructions
Step 1
Remove accessories from packaging and check all parts are included. The Classic Car Seat Cover Kit includes two items for the front seats, a cover and cover for the passenger sofa, headrest covers and hooks for securing. Lay out all covers the way you intend to put them on.
Step 2
Put on the front seat covers first. Move the front seats forward until they stop. Pull the headrest firmly and out of the chair. Place the seat cover on top. Stretch the fabric carefully and smooth out the wrinkles. There are special elastic bands along the edge of the cover, it is easier to find them by looking under the seat. Find them and connect using the hooks.
Step 3
Take the removed headrest. Cover it. Stretch the fabric carefully so that there are no wrinkles. Replace the headrest. Do the same for the second chair.
Step 4
Inspect the head restraints carefully. On some car brands, these rear parts are smaller than the front ones. This cannot be determined by visual inspection. It is necessary to fold the two side surfaces of the parts together. Consider them. Determine which is the front and which is the back. In the front, most often, the bend is most pronounced.
Step 5
Now proceed to the passenger sofa. Remove his seat. Pull the sofa upward using force. During this procedure, the mounts will unfasten and the seat will separate from the base. Place the cape of the cover over this part, carefully pulling out the elastic bands. Fasten them with special hooks.
Step 6
Cover the previously removed head restraints of the rear seat in the same way as the head restraints of the front seats. Tilt its back into the interior of the passenger compartment until it stops. Place the cover on its surface and fasten it securely. Then return the backrest to its original place and insert the head restraints. Put the removed seat back.