Any car enthusiast wants the interior of his car to sparkle with cleanliness. But it is not easy to achieve this during the operation of the car. The seats in the cabin often get dirty and lose their original appearance. To ensure their safety, the covers must be removed regularly for cleaning or replacement.
Instructions
Step 1
Move the front seats of the car forward until they stop. Sequentially remove the covers, first from the passenger seat and then from the driver's seat. To do this, you need to untie the ties, unfasten the straps or buttons that secure the cover to the seat (it all depends on the design of the specific covers). Pay special attention to the head restraints.
Step 2
Then free the back seat of the car from the covers. To do this, you may need to partially remove the backrest by tilting it forward. Fold the removed covers and place in a plastic bag for later cleaning or washing.
Step 3
Prepare replacement covers. Remove them from the package, check the contents. Place each item on the seat for which it is intended. Do not confuse the covers that should be worn on the driver's seat and the front passenger's seat (they may differ slightly in size).
Step 4
Slide each cover onto the corresponding front seat and attach using the provided mounts (rubber bands, buttons, etc.). The cover should fit the seat evenly, without folds; the seams should be located at the location of the seat bends.
Step 5
Install the covers in the same way on the rear seat of the car, first on the bottom of the car and then on the back. Slide out the seat belt latches. Lastly, put on the headrest covers, if provided by the design.
Step 6
In some particularly difficult cases, it is difficult to put on covers right in the cabin. Try removing the seats and removing them from the vehicle. But this can be quite difficult to do, although the process of replacing covers with this technology is noticeably accelerated.
Step 7
Be careful when replacing covers. When installing the corresponding elements on the headrests, try to push them into the cover, rather than pulling them from above, otherwise the product may be damaged. If the covers are brand new, make small holes for the hooks on the car seats, if necessary.
