The audio recorder supplied with the car has a rather poor sound quality. The salon may offer to replace it, but this is an expensive pleasure. The car enthusiast can independently choose the system he likes in any specialized store. When installing a new radio, you must enter the code yourself.
Necessary
- - automobile
- - radio tape recorder
- - instruction
- - keycode
Instructions
Step 1
Read the instructions for the radio. There it is indicated what it consists of, how to properly install it in the car, fix it. Make sure everything is done correctly.
Step 2
Turn on the radio. Here there are options for what message your system will give you. Further actions will depend on what is highlighted on the display.
Step 3
CODE: Press the "1-2-3-4" buttons several times until each gives the required keycode number. Make sure the code is entered correctly. Press button "5" (or "Up", "Down") to confirm.
Step 4
SAFE: press "TP" and "TA" at the same time. Wait until “1000” appears on the display. Enter the code using "1-2-3-4". To confirm, hold down the "TP" and "TA" buttons for 2-3 seconds.
Step 5
CODE - - - -: Using the same buttons, "1-2-3-4", repeatedly pressing each, enter the code correctly. After injection, press and hold the "SELECT" button.
Step 6
SAFE &: wait 2-3 seconds for the number "1000" to appear on the label. Enter a code. Watch carefully for it to be correct. When the code is entered, press the ">>" button. Hold it for 2-3 seconds.
Step 7
CODE IN: use buttons "1-6" to enter the code. To confirm the correctness of the entry, hold down "SCAN" and "MODE" simultaneously for 3-5 seconds.
Step 8
The display shows the time and counts down. Wait for the time to run out. Press "6" or "1 + 6", the word CODE will appear. Enter a code. To confirm, press and hold the number "5" for 3-5 seconds.
Step 9
Please note that there are radios that support direct code entry. This means that after the appearance of the word CODE, you need to click on the numbers corresponding to your code. That is, if the code is "63425", then you need to sequentially press: "6, 3, 4, 2, 5". In this case, the numbers may not appear on the display. In this case, when you enter the last number, the radio will turn on.
