By disconnecting the battery, the radio is automatically locked. To revive an irreplaceable companion in the Honda CR-V, you must correctly and carefully enter a special code.
Necessary
- - radio tape recorder
- - instructions for the radio
- - special code
Instructions
Step 1
Find the instructions from the radio. On the first page there should be a sticker with the numbers of a special code that must be entered into the radio tape recorder to unlock it. If the sticker is not in the instructions, then it may be in the car. Examine all possible places carefully.
Step 2
Turn on the power of the radio. Wait until the word “code” appears on the display. To enter a five-digit code, press the buttons with the same numbers in sequence. That is, if the desired option is 42315, use alternately 4 - 2 - 3 - 1 - 5. When the code is entered, the radio will automatically start working.
Step 3
To enter a six-digit code, wait for the word “code”. Also, by directly dialing the appropriate numbers, enter the correct number. Check the correctness of the code by comparing it with the one written on the card. If everything is entered correctly, the radio tape recorder will work.
Step 4
If the code contains only four digits, enter it as follows. Turn on the radio. The word “cod” should appear on the display. The code is not typed directly. Namely: by repeatedly pressing the buttons 1 - 2 - 3 - 4. To enter the first digit (it must be 0 or 1), press several times 1. To display the remaining numbers, use 2 - 3 - 4. The range of the last three digits of the code should vary from 0 to 9. Check the correctness of the entered number. If everything is correct, press the tuner settings button, the radio tape recorder will work.
Step 5
Enter the code into the radio tape recorder carefully. After three incorrect attempts, the system will lock up. Some models of radio tape recorders can simply be left alone for a couple of hours. After that, they will again give the opportunity to enter the code. If the radio tape recorder continues to be locked, leave it switched on, and in this state go about your business. After an hour, you can enter the code again.