Gas equipment (LPG) is installed on all types of vehicles, both carburetor and injection. There are many points of view about the pros and cons of HBO.
Necessary
wrench
Instructions
Step 1
Most often, gas equipment is installed on cars because of the difference in the price of gas and gasoline. It is also a positive point that when working on gas there is no detonation, less soot is formed, and the oil does not require such frequent replacement as when working on gasoline.
Step 2
In addition to the above advantages, HBO has a number of disadvantages: the weight of the car increases by 20-40 kg, condensate must be constantly drained from the reducer, the gas cylinder is located in the trunk and takes up a lot of space, in severe frosts the engine cannot be started, and the air filter must be changed 3 times more often.
Step 3
Therefore, if for some reason you decide to abandon gas equipment, you can simply unscrew the cylinder located in the trunk of your car and continue driving on gasoline.
Step 4
Before removing HBO, weigh well the pros and cons. Look for information in the specialized literature on gas equipment. If you nevertheless decide to finally get rid of HBO, follow these instructions:
Step 5
Before removing the gas system, make sure that all the taps on the cylinder are closed.
Step 6
Carefully unscrew the tubes and remove the parts in the following sequence: gas valve, reducer, cylinder, filling device. Perform all dismantling in the fresh air, because gas can remain in the tubes, and when they are removed, it will escape to the outside.
Step 7
Remove the petrol valve and repair the petrol line.
Step 8
Remove the atomizer from the carburetor and replace it with a new heat insulating gasket.
Step 9
Remove the hose and fitting on the intake manifold, and put a plug on the hole in the manifold.
Step 10
In the last step, remove the wiring to the valves and the fuel switch.
