Often the standard settings and systems interfere with the installation of additional equipment on a car. To bypass or disable them, either special devices or serious changes in the electronic system of the machine are required.
Instructions
Step 1
There are several ways to bypass a standard immobilizer on your own, varying in complexity. If you need to bypass the immobilizer to install an alarm with auto start, then you need to use a special immobilizer bypass module. You can purchase such a module from firms that sell additional equipment or security systems for cars. The ignition key is put in the module, and the power is taken from the alarm. The module antenna is attached to the immobilizer antenna, which is located on the ignition switch. As soon as you want to start the car from the remote control, power is supplied to the "lineman", it turns on and transmits information from the key to the standard immobilizer antenna. The immobilizer antenna reads the signal and the vehicle starts.
Step 2
If one of the ignition keys is lost, the remaining key must be disassembled and the chip removed. The chip must be attached to the immobilizer antenna on the ignition switch. In this case, the immobilizer will be disconnected from any key that is inserted into the ignition lock.
Step 3
You can go the most difficult way to bypass the immobilizer yourself. To do this, you need to understand the electrical circuit of the car. The immobilizer can block several circuits at once - fuel pump power supply, injector power supply and others. According to the diagram, you can find ways through which you can apply voltage directly.
Step 4
Help with the security system can also be in a technical center specializing in this car brand. Employees of the center or car dealership using a special computer program will help turn off the immobilizer. More global changes can be made. Namely - to change the "brains" of the car for new ones, in which the immobilizer is not registered.
