How To Choose A Compressor

Table of contents:

How To Choose A Compressor
How To Choose A Compressor

Video: How To Choose A Compressor

Video: How To Choose A Compressor
Video: How to Choose an Air Compressor 2024, November
Anonim

Nowadays, autocompressors are widely used. There are many models on the market with different characteristics. Basically, the devices differ in the type of compressor, operating pressure, operating speed, etc.

How to choose a compressor
How to choose a compressor

Instructions

Step 1

When choosing a compressor, first of all you should decide on its type. It is recommended to give your preference to piston models, as they are distinguished by their reliability and long service life. Diaphragm compressors, as a rule, are cheaper, but inferior in performance to piston compressors.

Step 2

Do not limit your choice only to the speed of work. Most often, a car enthusiast uses a compressor only for pumping, in this regard, it is better to pay attention to the capabilities of the unit, for example, the presence of auto-shutdown functions when the required pressure in the wheel is reached and protection against overheating.

Step 3

The type of pressure gauge installed is also an important criterion. For more comfortable use of the compressor, a model with a digital indicator is best suited. Digital pressure gauges give more accurate readings than analog ones, since the latter negatively tolerate shaking and vibration during compressor operation.

Step 4

Based on the size of your vehicle's tires, pay attention to compressor performance. The speed of pumping the wheel depends on the performance. If you have a car, then you can choose a compressor with a capacity of 30 to 40 liters / min. Such a compressor will easily inflate the wheel of a "passenger car" and the wheel of a small SUV.

Step 5

More efficient compressors due to more intensive current consumption are connected directly to the battery using clamps. This is for the safety of the vehicle wiring. Also, you should decide on the length of the hose, since its length can be up to 7 meters. There are compressors with a long coiled hose and a pressure gauge attached to its end, this is done for the stationary fastening of the autocompressor in the trunk or engine compartment of the car.

Recommended: