Wheel covers are used by many motorists, but problems arise when the question of how to remove them arises. This is not as easy as it seems, so below are some simple tips to help you easily remove the wheel caps.
Necessary
jack, power screwdriver
Instructions
Step 1
First, figure out what, in fact, wheel caps are and what they are for. Wheel covers have two main functions: protective and decorative. The first one is excellent in use by motorists in the winter. The caps will confidently take the blow in the form of dirt, snow, ice, reagents and other troubles inherent in this season. Naturally, they will lose their appearance at the same time, but it is much easier and, importantly, cheaper to replace the hubcaps than to purchase new discs. If we talk about the decorative function, then the hubcaps are purchased as an alternative to light-alloy wheels. The cost of such discs starts from $ 100, but the caps can be bought at a price of five times less, that is, the difference, as they say, is obvious.
Step 2
If you follow the instructions, then the scheme for removing the caps from the wheels is as follows: take a jack and use its handle in order to remove the caps from the wheels.
Do not try to remove the caps with your hands only, as this can cause serious and serious consequences.
Step 3
In order not to damage the cap during dismantling, use a piece of cloth, place it between the wheel and the jack handle. Try to work carefully so as not to damage or scratch both the hubcap and the wheel.
Step 4
Experienced motorists also suggest the following method. Take a screwdriver, hook it on the protrusion and start pulling the protrusion towards the center of the wheel, while pulling the cap towards you.
Step 5
Try also using another screwdriver, pry off the cap itself with it, that is, place it in the hole between the wheel disc and the cap. However, be careful, carry out all manipulations with extreme caution, as excessive efforts can damage the cap.
