In cases where the owner needs to disassemble the headlight on a VAZ 2110 car, in order to gain full access to the specified equipment, it is necessary to remove the front bumper from the car.
Necessary
- 8 mm socket wrench,
- socket wrench 10 mm,
- curly screwdriver.
Instructions
Step 1
In fact, there is nothing complicated in such a procedure, despite the impressive dimensions of the dismantled part.
Step 2
If additional lighting or other electrical equipment is installed on the bumper, then the on-board network of the machine is necessarily de-energized by disconnecting the negative ground cable from the battery.
Step 3
Next, the radiator grille is dismantled.
Step 4
After removing the grille, one at a time unscrew the bumper mounting bolts located on the sides of the car in the lower part.
Step 5
By unscrewing the two front mounting bolts, the bumper is dismantled by simply sliding it forward in the direction of the vehicle.
