Modern cars are equipped with power windows that drive car windows. The convenience of this automatic system lies in the fact that the driving force is created by an electromechanical drive, a signal to which can be supplied from a remote control.
It is necessary
- - window regulator kit;
- - Screwdriver Set;
- - keys;
- - silicone spray;
- - wires.
Instructions
Step 1
Connecting the window regulator button provides, first of all, the installation of an automatic mechanism. Remove the lining of the inner side of the door, and then select the appropriate gear from the power window kit and put it on the standard axle.
Step 2
Then put on top of this part an external gear that matches it in size.
Step 3
Install the third gear (in total there are three such parts in the kit), which comes complete with the motor: the second and third gears should touch. Then put on the retaining ring.
Step 4
Use the spacers provided to secure the motor and third gear. To do this, first install the motor correctly (it can be moved discretely, directing it to one of the four sides, to do this, just unscrew one of the four screws).
Step 5
Treat all glass contact points with the guides with silicone spray.
Step 6
From each door, pull two wires into the salon, and then take a set of wires from a dozen. This set of wires consists of a harness on one side and a chip for the fuse box and two contacts for the power window motor on the other side.
Step 7
Connect the wires that you brought into the passenger compartment with the wires from the harness. Then connect the power: it is best to run the power on a separate wire from the car battery through the fuse.
Step 8
Then cut in the power window button. You can install the button both in the parking brake console and in the ashtray niche.
Step 9
Finally, check the operation of the automatic window regulator.
