Despite the simplicity of the algorithm of actions that need to be performed in order to start the car and drive off, very often novice motorists have problems with this. To prevent them, it is enough to bring a few steps to automaticity.
Instructions
Step 1
The type of gearbox also determines what actions the driver needs to take to get his car to move. The automatic transmission works on the basis of a torque converter, which does not require human assistance to change gears. The transmission level on the mechanical box depends on the distance of the two serrated wheels.
Step 2
Carry out all the necessary actions stipulated by the traffic rules. Fasten your seat belt, adjust your rearview mirrors, adjust your seat. Do not forget to check the situation on the road before starting off, turn on the turn signal if necessary.
Step 3
An automatic car has four main modes: park (P), reverse (R), neutral (N), drive (D). Your starting position should be: foot on the brake pedal, handbrake on.
Step 4
Move the lever from position P (or R) to position D, release the handbrake and brake pedal. The machine should automatically move away smoothly.
Step 5
It is a little more difficult to move the car from a place on the mechanics. Take the starting position: tighten the handbrake and put the transmission in neutral.
Step 6
Turn the ignition key to start the engine. Squeeze the clutch with your left foot, while your right should be on the brake pedal. Carefully releasing the clutch pedal, try to catch the movement of the car and catch it at the moment of clutch (the arrow on the tachometer will make a sharp movement).
Step 7
Having caught the moment, move your foot from the brake to the gas pedal, and leave your foot on the clutch in the same position. Add gas until the car starts to move a little. Release the clutch gradually and add gas.
