You can paint the car yourself. True, when it comes to small cosmetic repairs. And it's best to do it from a spray can. And for the result to please you, you need to follow all the rules for dyeing the car.
It is necessary
- -a can of paint;
- -protective film;
- -lacquer
Instructions
Step 1
Find a room first. It should be spacious, not ventilated (i.e. there should be no wind), and there should be no dust.
Step 2
Prepare the surface for painting. Sand and prime the area to be repaired, degrease it. Then cover the rest of the parts and parts with special protective film or paper. This is necessary so that paint does not get on parts that are not being repaired.
Step 3
In addition, match the paint to the color. This can be done using computer selection. If you are not sure of your choice, consult with the sales consultants of the car store.
Step 4
Next, start painting the car. Shake the can of paint for 2-3 minutes. This will help it mix properly. Then paint a test piece on any iron part. Such a procedure is needed in order to understand with what force to spray the paint and how thick the layer is obtained.
Step 5
Spray the paint from a distance of 30 cm. Cover the surface with thin layers of paint. As soon as you apply one of them, let it dry for 10-15 minutes. Then apply paint again. Make three layers.
Step 6
After you finish painting and let the last layer dry, cover the part to be repaired with a colorless fixer varnish. It will dry out in 30 minutes. The repair procedure can now be considered complete.