To perform a high-quality spray painting of the car, you must familiarize yourself with the nuances of the procedure in advance. Even when working with expensive paints in cylinders, the desired result may not be achieved. For beginners who are going to paint a car on their own with a composition from a spray can, it is better to stock up on detailed instructions.
Preparation
To perform high-quality painting of a car in a garage or in other conditions other than service centers, you should pay more attention to preparing for painting. It is necessary to treat the surface with a special cleaner to remove dirt, traces of rust and old coatings. If a small patch of rust remains, the corrosion process will continue to develop under the dry coating.
Putty
Clean the surface with sandpaper, degrease, put putty on the surface. Wait until the layer of material is dry, then sand again.
Primer
For the application of the primer, high-quality compounds are chosen that can provide the metal with reliable protection. The process is easy to complete if the soil is applied from a spray can with your own hands.
Painting
If you don't know how to properly paint a car from a spray can without smudges, it is better to watch a suitable video in advance. You can try to work out the correct movements on an unnecessary piece of iron and paint the arches or other parts of the body so that the appearance turns out to be attractive and neat in appearance.
Before painting the car, shake the can for about 10 seconds - this is done to obtain a mixture with a uniform consistency. It is applied to the surface from a distance exceeding 25 cm. The coloring agent should be applied in 2 or 3 layers. Each of them should dry within 5-7 minutes. Apply the first of the layers with horizontal movements, the subsequent ones - with vertical movements.
In order for the staining to be uniform, it is better to select aerosols equipped with a regulator - they help to choose the desired direction of the jet.
Polishing
It is impossible to polish the car in a fresh layer of paintwork - you must wait until it dries well. This stage of work is best done a day after staining. But it is also not worth tightening - if you do not polish the fresh layer on time, you will not be able to change the surface. For such work, you can use a drill at low speeds or a sander. You can find out how much car paint dries from a spray can by looking at the information indicated by the manufacturer on the packaging.
Aerosol cans for a car can be an excellent opportunity to upgrade a vehicle if all stages of the process are well understood. For those who do not know how to paint a car with a spray can at home and for this reason do not take up work, we can recommend that you read the information on the issue, study the instructions for the selected paint and reviews about it. There are no difficulties in the process, especially if you work out its stages in detail in advance.
