Various noises and squeaks in any car annoy the driver and passengers. In "Lada Priora", the noise that has arisen in the car interior can be eliminated by yourself, with a little effort and spending your free time on this problem.
Necessary
- - material "Vibroplast";
- - wooden shelf;
- - sharp scissors;
- - marker;
- - roulette.
Instructions
Step 1
To remove unpleasant noises in the car, first remove the bolted cover from the tailgate. The fact is that in Lada Priora most often the first noise begins to appear in the trunk area and from the seat belt reels. In addition, the plastic shelf makes itself felt, rattling at the moments when the car hits the bumps.
Step 2
Next, using a tape measure, measure the inside of the door. Having written down the parameters on a piece of paper, spread a special material "Vibroplast" used for noise insulation in cars. Using a marker on the material, draw a shape corresponding to the measurements taken and cut it out.
Step 3
Then glue the inside of the door with the cut out "Vibroplast". To make the best soundproofing, glue the door in two layers, while leaving all the details related to the lock free.
Step 4
After finishing with gluing, disassemble the upper sidewalls of the door and thoroughly tighten the parts of the seat belt reel. If a very loud noise is emitted from the coil, the belts must be replaced. Lubrication or oil to eliminate this noise is simply not acceptable. After all, it is about your safety on the road.
Step 5
Replace the plastic shelf with a wooden one. You can make it yourself. If you don't have the time and desire, buy it in the store. In case you are not sure that you can properly soundproof your car, contact any service station, where experienced craftsmen will do the job quickly and efficiently.
