Torpedo is a panel that performs the most important functions in the car interior. A dashboard is inserted into the dashboard, which is of primary importance to the driver. The dashboard has a panel for turning on and controlling the heating of the passenger compartment using a stove. Given the importance of this equipment, the driver must be able to correctly position the dashboard.
Instructions
Step 1
Make sure you have all the dashboard items. First of all, these are bolts for mounting a dashboard and self-tapping screws. Then the dashboard. Further, there are handles for controlling the stove, a button for turning it on, an ashtray. Don't forget the deflectors.
Step 2
Proceed with the installation of the torpedo. It is better to perform it together. After pulling the panel into the passenger compartment, start putting it on both sides at the same time. Remove the instrument chips through the dashboard hole. In the same area, find the bolts for attaching the dash to the car body. Secure them. Similar bolts are available in the storage compartment of the panel. Then fasten the panel under the steering column using self-tapping screws. The dashboard is now attached to the vehicle body.
Step 3
Start assembling the panel. Attach the dashboard with the chips. The speedometer must be screwed in with a cable. Without it, the device will not display values. After that, insert the dashboard into the hole of the dashboard and secure it with the latches. Put on the steering wheel if you removed it. Secure the handles to the stove switches, the button to turn it on, and the ashtray. Place the deflectors in the hole last.
