Fans of a sporty driving style, purchasing a car, first of all, as a rule, are puzzled by the solution to the issue associated with the possibility of installing a turbine on the engine of their car. Equipping the motor with additional equipment is aimed at increasing the engine power.
It is necessary
- - turbine - 1 set,
- - a set of locksmith tools.
Instructions
Step 1
There are many options for tuning the motor. For this reason, we propose to study the issue of forcing the engine using the example of installing a low-pressure turbine on an injection engine of the VAZ model range.
Step 2
This tuning allows the installation of the specified equipment, leaving unchanged: the cylinder block, crank and gas distribution mechanisms. But the cylinder head will need to be replaced. In this case, a cylinder head with enlarged combustion chambers is required. This is due to the fact that a turbocharged engine has a reduced compression ratio in the working cylinder compared to a conventional engine.
Step 3
In the process of installing the turbine on the engine, the exhaust system is subjected to changes. All necessary parts for such an upgrade should be included in the package. In cases where the manufacturer has taken care of facilitating the tuning, the alteration procedure is greatly facilitated.
Step 4
The most expensive part of tuning a motor is a low-pressure turbine, the choice of which depends entirely on the planned budget for this purpose. On engines of cars of the VAZ family, the turbine is mounted between the intake pipe and the exhaust manifold, above the right front wheel drive. Two air ducts are connected to it: one is connected to the air filter, the other to the receiver.
