Modern radios in Ford meet the requirements of car enthusiasts. They are easy to use, provide high-quality sound of your favorite music, they have the ability to connect external media. When she works, time in traffic jams is usefully: you can relax and gain new knowledge interactively. to enjoy all this, the first time you turn on the radio, you need to unlock it.
Necessary
- - radio tape recorder
- - keycode (if any)
- - serial number of the radio
- - thin metal objects
- - special program
- - documents for the car
Instructions
Step 1
If the radio is new, then when you first turn it on, it may behave differently (depending on the model): immediately display the word CODE or start a countdown. For the second option, wait until the time runs out. Press and hold a specific button for 3-5 seconds (usually 6 or the option with two buttons: 6 + 1). The display should show the word CODE.
Step 2
Enter a four-digit keycode. Usually it is issued together with the radio tape recorder itself. Press "1" several times until the desired number is displayed on the panel. Press "2" to dial the second digit of the code. Followed by "3" and "4". Watch carefully so that all numbers match the keycode.
Step 3
Press "5" to confirm when the panel displays the correct code. After the done actions, the radio tape recorder will turn on, and you can enjoy your favorite music! Be sure to write down the keycode.
Step 4
When removing the battery, the radio is automatically turned off. In this case, you will need to re-enter the code. If it is lost, remove the radio from its slot.
Step 5
There should be a special sticker on the side of the device. It contains the serial number. Usually, it starts with a letter (often M).
Step 6
There are several programs for the selection of a lost code. Download the one you like from the Internet, install it on your computer, open it. Enter your serial number. The program picks up the code. How to enter it into the radio tape recorder - steps 1-3.
