If you decide to refine your car and install a fresh audio system, you will be glad to know that you can do it yourself. All you need to install a new car audio system is the usual handy tools, a little time, patience and a couple of simple tips on how to set up this unit in your car step by step. By following them, you can easily and quickly achieve the desired result.
Instructions
Step 1
Examine your vehicle. Before you go to select the acoustics for your car, you need to thoroughly study it. Plan the places where the speakers can be installed, choose the place where the center subwoofer will be installed, on which the overall "atmosphere" in your car will depend.
Step 2
Go to the store after inspecting the vehicle. A wide range of similar loudspeakers are presented at the same points where ordinary parts are sold. If you are in doubt about your choice, ask a consultant to help you. Remember that not all systems can be installed on all types of vehicles. If possible, ask the seller to "try on" your choice. If everything roughly converges and all the wires are enough, you can make a purchase.
Step 3
If you are not impressed by the choice of the store, you can buy a special set specifically for your car brand via the Internet. In this case, you do not have to worry about installation and further use.
Step 4
Mark the upholstery material. With a regular pencil, circle the places where the speakers will be installed, mentally draw lines along which the wires will go to the battery, and decide where the subwoofer will be installed.
Step 5
Cut the holes very carefully, it is advisable to practice before this, or make a mold on which you will cut. A regular construction knife should do the trick. If you are dealing with plastic, drill a hole and cut the required amount of material in a circle.
Step 6
Install the speakers in the cut-out holes, route the wires to the power, and check that the wires are correctly connected to the control panel. If everything works right, just enjoy the result.
