While driving, the driver should avoid driving at high speed along the right edge of the carriageway close to the shoulder. According to the laws of physics, all small rubbish from the roadway, among which there may be nails and other sharp objects, moves precisely to the side of the roadside. Driving through the designated area may result in a punctured tire.
Necessary
- - jack,
- - "balloon" key,
- - mounts - 2 pcs.,
- - a hammer.
Instructions
Step 1
During long journeys, for example, in the Siberian regions, where the population density is so insignificant, and there is nothing to say about the abundance of tire shops, there is a high probability that, having punctured one wheel and not having time to reach a car service station, you will puncture another. Two punctured tires are already too much, and in order to further continue the path, at least one disk must be mounted.
Step 2
To remove the punctured tire from the rim, first separate one and then the second inner rim of the tire from the edge of its beads using pry bars.
Step 3
Next, pushing your foot on the tire on the diametrically opposite side of the wheel inside the tire, insert both mounts, with the help of which the edge of the tire is placed over the outer part of the rim. Hold the tire with one pry bar and move the other a little further away from it. The edge of the tire is again “turned out” onto the disc. And so step by step until one side of the tire is completely outside the wheel disc.
Step 4
After eliminating the puncture of the wheel, put the tire on the rim using pry bars. In this case, the most difficult part is the final part of this process, when it remains to put on an insignificant part of the tire. It is no longer possible to slip the pry bar under it. Then the tire is upset on the disc by careful hammer blows on its inner rim.
Step 5
When the wheel is mounted, there comes a crucial moment associated with its inflation. If some edge of the tire does not fit completely against the rim, do not try to straighten it under any circumstances. Bleed air first, then correct tire placement.
Step 6
When installing the jack, it is necessary to take measures against arbitrary movement of the machine by placing wheel chocks under the wheels of the car.
