How To Install A Vending Machine

Table of contents:

How To Install A Vending Machine
How To Install A Vending Machine

Video: How To Install A Vending Machine

Video: How To Install A Vending Machine
Video: Installing Vending Machines at a New Location 2024, July
Anonim

The desire to install an automatic machine in your car may be caused by the failure of an old gearbox or the need to replace a mechanical one. This operation is possible for almost any machine, only the price of the issue stops. To make the installation of the machine cheaper, you can carry out some of the procedures yourself.

How to install a vending machine
How to install a vending machine

It is necessary

  • - instructions for automatic transmission
  • - good technical knowledge of the car
  • - butter
  • - gasoline or thinner
  • - money

Instructions

Step 1

When installing a new machine in a car instead of an old one, first find out why the previous one failed. This is to prevent recurrence of the emergency.

Step 2

Check your vehicle's cooling system. Make sure the radiators are in good working order. Pay extra attention when examining the control system. See if the brake system and transfer case are working correctly. Consult an oil specialist. Sometimes the use of the wrong type of oil will damage the automatic transmission.

Step 3

Dismantle and flush all automatic transmission radiators. Flush the outside at the sink. When doing this, keep the water jet perpendicular to the radiator. Make sure the water is supplied at high pressure. Flush the internal radiator passages with gasoline or thinner. It is necessary to fill it several times and blow it out with air from the compressor (pressure - about 8 atmospheres and more).

Step 4

Check the condition of the wires and electrical connectors. They must be complete, without damage, well suited to the automatic transmission.

Step 5

Using a tester, carry out electrical diagnostics of the machine. If necessary, take care of adapting / flashing the computer.

Step 6

Change the oil using the one recommended by experts. Fill it in accordance with the recommendations in the instructions for the automatic transmission.

Step 7

If your vehicle is 4WD, be sure to fit the wheels of the same type and size. The pressure in the four cylinders must be equalized.

Step 8

The machine is installed in service and repair shops. Be sure to inquire about certification for these types of repairs.

Recommended: