Having dared to carry out tuning of his car, the car owner usually begins to make changes to the design of the car. Everything that catches the eye is primarily subject to modernization. And when you look at the car from the front, it is impossible not to pay attention to the side mirrors.
It is necessary
- - screwdriver,
- - metal plate 2 cm wide and 3 mm thick.
Instructions
Step 1
To paint the mirror housings, they must first be disassembled. To achieve this task, it is required: from inside the cabin, move the mirror down as far as possible.
Step 2
As a result, a slit is formed in the upper part of the mirror, into which it is necessary to insert a wide, flat, not thicker than three millimeters, metal plate. With the help of which, by a sharp push from oneself, the mirror element is removed.
Step 3
At the next stage, the decorative plastic strip located on the inner surface of the door is removed with a screwdriver. After removing it, the three bolts securing the rear-view mirror housing on the car door are unscrewed.
Step 4
Having dismantled the case, inside it, all the structural parts are freed from the fastening and all structural parts are removed: the mechanism for the angle of inclination of the reflective element, the spring and the mounting bracket for the mirror insert.
