VAZ cars are very popular in Russia. It is due to its low cost and ease of maintenance. Almost all minor repairs can be done by hand, without resorting to the help of expensive service centers. For example, many motorists choose the VAZ 2110. But, having bought a used "top ten", it is necessary to bring it into good shape.
Necessary
A set of tools, aerodynamic body kit, toning, spoiler, paint, putty, new shock absorbers, springs
Instructions
Step 1
Examine carefully the condition of the car's paintwork. Take a look at the technical data sheet. There you will find information about whether the body of your dozen is galvanized. Minor abrasions and scratches can be easily repaired by buffing. Pay attention to the rear wheel arches. This is a sore spot for dozens. If the arches have begun to rust, then it is necessary to clean them up to clean metal. Then putty in two layers and paint. Arches with obvious metal corrosion need to be digested. Another vulnerable spot is the rapids. They must be filled with oil so that the corrosion process does not begin. Affected thresholds must be replaced.
Step 2
Examine the suspension of your car. Not only the technical condition depends on it, but also the safety of driving. Measure the ground clearance of the vehicle and check the value against the factory figures. Pay attention to the shock absorbers. There should be no smudges on them. It is best to use gas shock absorbers. They swallow the unevenness of the road surface well and have a long durability resource. Also pay attention to the springs. Over time, they lose their qualities and burst. Defective springs must be replaced with similar new ones.
Step 3
Work on the exterior styling of the car. Purchase external aerodynamic kits to your liking. There is a very large assortment on the market now. You can install a wing. Deflectors on the doors will protect you from raindrops from a slightly open window. Correctly selected rims will add solidity to your car. If you do not want the sun's rays to blind you upon arrival, then tint the glass, but remember about the regulatory documents, which indicate the maximum possible percentage of tinting in accordance with GOST.
Step 4
Take care of good optics for your car. Factory headlights and taillights leave a lot to be desired. There are many options for modernization. Xenon or halogen bulbs can be installed. This is a more budget option. If you want quality light, then buy a new set of headlights. Moreover, you can choose an option that is completely different from the standard one. If you install LED rear lights, your car will be clearly visible even in foggy weather.
