It is quite difficult in modern life to imagine a personal or company car without an alarm. Even if your city or village is quiet and calm, and only theft from private gardens is common among criminal incidents, it will still be calmer when your car is equipped with an alarm. How to install an alarm on a car on your own?
It is necessary
- - An alarm system purchased at any auto shop in your city;
- - set of tools;
- - knowledge of the basics of working with car electrical equipment.
Instructions
Step 1
Buy an alarm from the store. The choice is now vast. There are simple alarms, and there are whole anti-theft systems.
Step 2
Determine the installation location for the main alarm unit. Typically, this part is installed in the cavities behind the dashboard on the left or right side. Remove the dashboard, then remove the driver's knee accessory panel, if equipped, also loosen the ignition key block for easy access.
Step 3
Following the instructions supplied with the alarm, connect the main unit to the engine electrical system
Step 4
A rather important point is the installation of control. Each alarm has a tamper control unit. Its principle of operation is to trigger an alarm if they want to de-energize the car. In order to connect the control unit, use the advice of the instructions. Typically it offers a connection to a tachometer.
Step 5
If your alarm system provides for automatic door locking, connect the appropriate unit to the door automation system. You will also find a detailed description of this process in the instructions for the alarm. If your alarm provides for a remote engine start, following the instructions, connect this unit as well.
