Remote control keys for door locks for Lada Kalina are programmed in the same way as keys for Lada Priora, Niva and UAZ Patriot SUV. Except for the red master key, no instrumentation is required.
It is necessary
master key
Instructions
Step 1
The remote control for the locks of doors, alarms, windows, trunk and immobilizer is mounted on the blade of the ignition key and is designed to operate both via radio and transporder channels. Safety measures for handling it are the same as with other electronic devices: protect them from mechanical damage, moisture, heat and hypothermia, etc.
Step 2
Before starting to work with the remote control, activate it (teach) using the master key from the immobilizer. It differs from the rest of the keys by its red color. After activation, the remote control will be able to function as an immobilizer code key and remove the prohibition to start the engine. The system can be activated and operated simultaneously with two remote controls.
Step 3
Before starting the training, make sure that there is at least 10 liters of fuel in the gas tank. Otherwise, you run the risk of getting lost in the sound signals emitted by the machine. Close all doors, turn on the ignition with the master key and wait at least 6 seconds. Then turn off the ignition. At the same time, the indicator in the control lamp block should start blinking quickly and continue to do this throughout the entire training procedure. If this blinking stops, then you made a mistake, exceeded the allotted time, or some kind of malfunction has occurred.
Step 4
Remove the master key from the ignition switch. Then, before the expiration of 6 seconds, insert the learning key into the lock and turn on the ignition with it. In this case, the immobilizer should give three beeps, and after 6 seconds - two more. Remove the trained key from the ignition switch. If learning has not happened, repeat the procedure again, trying not to go beyond the 6-second interval, or look for a malfunction in the immobilizer.
